-
Product Center
-
home
-
News Center
-
technology
-
download
-
Contact Us
Product Introduction
XH-2T/3T/5T anchor rod tensile tester (anchor rod tensile tester) is a portable tensile testing instrument developed and produced by Beijing Tiandi Xinghuo Technology Development Co., Ltd. This instrument is suitable for detecting the anchoring force of anchor rods, planting bars, anchor bolts, and other anchor solids. It is one of the commonly used instruments for quality inspection of anchor rod and anchor bolt construction support engineering.
The anchor rod tension meter/anchor rod pulling instrument is composed of manual pumps, hydraulic cylinders, digital pressure gauges, and high-pressure rubber hoses. The pump body is made of precision cast steel, with a long service life. The hydraulic cylinder is a hollow self resetting type, and the XH series hollow oil cylinder is equipped with a handle and can be connected to a high-pressure hose through a quick connector. The digital pressure gauge reading is intuitive and can directly read the anchor rod tension (kn) value. This series of tension gauges has a compact structure, convenient carrying, small size, and light weight.
The manual pump of the tension gauge can also be used as a power source for universal low flow high-pressure oil.
operational principle
The working principle of the anchor rod tension meter (pull-out instrument) is: when the central hole of the jack covers the tested rod, select a suitable fixture to clamp the part of the tested rod that exposes the central hole; Under the action of the hydraulic pressure of the pressure pump, the oil pressure is transmitted to the jack cylinder body through the oil pipe, and the piston rod moves outward against the specialized clamp; The pressure directly acts on the outer shell of the anchor and is then transmitted to the clamp. After being subjected to force, the clamp clamps the tested rod tightly, ultimately causing the rod to experience outward pulling force; At this point, the pressure gauge on the pressure pump displays the corresponding force (kN) value, which reflects the magnitude of the pulling force on the tested rod.
If the above rods are steel bars, the magnitude of the anchoring force on the steel bars can be measured. After completing the inspection, the puller needs to manually shake and vibrate the anchor with minimal force to easily remove the puller jack.
技術參數：
產品型號 | XH-V1 | XH-V2 | XH-V3 | XH-V4 | XH-V5 |
測量范圍 | 0-10KN | 0-20KN | 0-30KN | 0-40KN | 0-50KN |
中心孔徑 | 18mm | ||||
油缸行程 | 50mm | ||||
分 辨 率 | 0.001KN | ||||
示值誤差 | 1% | ||||
供電方式 | 鋰電池 | ||||
油缸重量 | 1.8KG | ||||
常用錨具 | 6mm-12mm | ||||
拉 桿 | M12 | ||||
轉換接頭 | M6-M12 | ||||
主要技術參數
| 型號主要參數 | XH-1T | XH-1.5T | XH-2T | XH-3T | XH-5T | |
| 高壓手動泵 | 最大工作壓力/MPa | 40 | ||||
| 柱塞直徑/mm | 12 | |||||
| 質量/kg | 4.5 | |||||
| 液壓缸 | 最大拔出力/kN | 10 | 20 | 20 | 30 | 50 |
| 中心孔徑/mm | 18 | |||||
| 活塞行程/mm | 30 | |||||
| 質量/kg | 1.8 | |||||
| 數顯壓力表 | 測量范圍/kN | 0～10 | 0～20 | 0～20 | 0～30 | 0～50 |
| 電源/V | 9V電池1節 | |||||
| 質量/kg | 0.4 | |||||
| 分辨率 | 0.01KN | |||||
| 示值誤差 | ≤±2%F.S | |||||
配件與保修
| 實驗儀器設備裝箱單 | |||||
| 序號 | 名稱 | 數量 | 序號 | 名稱 | 數量 |
| 1 | 中空液壓缸 | 1個 | 2 | 手動泵（帶包裝箱） | 1臺 |
| 3 | 說明書 | 1份 | 4 | 保修卡 | 1份 |
| 5 | 合格證 | 1份 | 6 | 便攜箱 | 1個 |
| 可選配件：錨具、拉桿、轉換接頭 | |||||
