-
Product Center
-
home
-
News Center
-
technology
-
download
-
Contact Us
XHJM-5/10 Rivet Puller (Insulation Material Bond Strength Tester) This product is a new type of testing instrument developed by Beijing Tiandi Xinghuo Technology Development Co., Ltd. It is suitable for testing the rivet pulling force of fixed insulation materials in construction projects, the bond strength of wall insulation materials, and decorative bricks.
The XHJM-5/10 rivet puller adopts an electromechanical integrated design, and the entire set of instruments is integrated. The mechanical parts such as the handle, sensor, screw, and reaction support form a "door" structure. The force sensors, electronic circuit boards, batteries, etc. are all installed inside the detector, and the LCD display and operation buttons are embedded on the upper end face of the detector. The detector has weight
Features such as lightweight, labor-saving handle operation, and simple operation.
Main functions of the detector:
Function selection: suitable for testing the pulling force of rivets, insulation materials, and bonding strength of decorative bricks.
Measurement selection: rivet pulling force testing, insulation material and bonding strength testing of decorative bricks (different test blocks).
Automatic reset: After power is applied, the deviation value is automatically eliminated and the output is displayed as zero.
Peak hold: In the peak hold state, the maximum pulling force value is always displayed.
Data storage: It can store detection values and can be called up and cleared at any time.
Automatic shutdown: With delayed power outage function, extending battery life.
Linear correction: 5 correction points can be set to correct the linearity of the data and improve detection accuracy.
Strength measurement: It can directly display the MPa value.
According to standards:
JGJ 144-2019 "Technical Specification for External Wall Insulation Engineering"
JG/T 158-2013 "Rubber powder polystyrene particle external wall insulation system"
JG 149-2003 "Expanded polystyrene board thin plastered external wall insulation system"
JGJ 110-2017 "Standard for Testing the Bond Strength of Facing Bricks in Building Engineering"
JGJ 126-2015 "Code for Construction and Acceptance of Exterior Wall Facing Brick Engineering"
GB 50550-2010 "Code for Acceptance of Construction Quality of Building Structure Reinforcement Engineering"
Technical parameters:
Measurement range 0-5kN/10kN
Tensioning stroke 60 mm
Weight 2.6 kg
Accuracy level ≤ ± 1.0
Power supply 4.2V rechargeable battery
Switching current ≤ 2 μ A
Working current ≤ 10 mA
主要技術參數
| 設備技術參數表 | |||||
| 序號 | 技術名稱 | 參數 | 序號 | 技術名稱 | 參數 |
| 1 | 最大拉力值 | 5kN | 2 | 張拉行程 | 60 mm |
| 3 | 重 量 | 2.6 kg | 4 | 精度等級 | ≤±1.0 |
| 5 | 電 源 | 4.2V可充電電池 | 6 | 關斷電流 | ≤ 2 μA |
| 工作電流 | ≤ 10 mA | ||||
產品配置：
| 實驗儀器設備裝箱單 | |||||
| 序號 | 名稱 | 數量 | 序號 | 名稱 | 數量 |
| 1 | 主機 | 1臺 | 2 | 拉拔頭(6mm,8mm,10mm各一個) | 3個 |
| 3 | 標準塊40*40mm | 3塊 | 4 | 標準塊100*100mm | 3塊 |
| 5 | 充電器 | 1個 | 6 | 說明書 | 1份 |
| 7 | 合格證 | 1份 | 8 | 保修卡 | 1份 |
| 9 | 便攜箱 | 1個 | |||
